场景中砖墙的经济做法【非原创】

注意：本方法绝非本人原创，如有冒犯，请管理员立即删除，谢谢！


材料的准备：包括：石膏粉（1块钱一大袋，这里是已经用剩一年的）、乳胶（三块钱0.4KG）

准备工具包括：手术刀（我没有模型专用刻刀，刀柄：6块、刀片：0.5元）、缝衣针（1元店里大把是）

将石膏加水后搅匀，最后加进乳胶以增加韧性，与石膏的脆性配合

  

 倒进模具里大概有0.5CM厚，放在通风好的地方晾干，大概2～3天，图中是已经晾干取出的石膏墙体原型

取出“墙体”,用手术刀削出要露砖的墙面

这是削好的墙体,然后用针在低平面的地方刻出砖纹，后是上色，因为世界上做砖用的土质都不同，根据需要调出所需地方的砖色

全部经济花费包括工具材料共计11.5元（PS：可以做足一年模型用的墙壁)

How to assemble a gundam beginner 1

Beginner Getting Started first do not rush to ask what to buy, anything else the whole system~~~ First of all learn the tool first ... a lot of people say that modelling tools too many type as, we don’t have all the tools here  In fact, as a beginner, the most basic, the most useful tools, undoubtedly the most indispensable pliers and a pen knife, pliers simply is part Peeling off from the board down, pen knife is used for processing the part when peeling I glue residue, commonly known as the outlet ~ ~

Tamiya gold medal cutter!is well known 

Normal part...you can cut which ever you like,have to be careful while cutting some part certain part need to  

leave 2~3mm

But for the small part,you need to use the top tip to cut haha......on this moment you need to test if your cutter sharp enough

For my opinion a normal cutter will do,but if you are willing to spend money on cutter i will suggest you to buy (Tamiya gold medal cutter)

I do not recommend for the normal pen knife,because is not good enough

so i suggest you to buy (Tamiya pen knife)

some people like to use pen knife to cut the part actually is not good,is not because can or cannot

it is because it can affect the span life of your pen knife

If parallel to the cutting down,waste your time and strength,can you use a pen knife to saw?Hahaha.... 

We take a look at the part we cut, usually have this situation at the maim part there is some thing left behind

We can use our hand to hold this part like this picture after that cut part that are left

let's look at the complete work,isn't it simple is because nothing in the way